DFM Series Guide Rod Aluminiyam Air Cylinder Tubes

DFM Series Guide Rod Aluminiyam Air Cylinder Imibhobho Featured Umfanekiso

Inkcazelo emfutshane:

Uthotho lweDFM
Uhlobo lwe-Festo lwe-Three-Axis Guide Rod Pneumatic Cylinder Tube
Ngumgangatho we-FESTO.Ubungakanani bombhobho busuka kwiDia12mm ukuya kwiDia100mm.
Ubude buzimitha ezi-2.Izinto eziluhlaza yi-6063-T5 ingxubevange.

Cela ixabiso lethu lamva nje

Iinkcukacha zeMveliso

Iithegi zeMveliso

DFM Series umzobo

NO	d	d1-2	A	B	C	D	E
1	φ12	φ11.5	60	41	28	10	-
2	φ16	φ13	67	46	32	8.1	-
3	φ20	φ15.5	83	58	36	10	-
4	φ25	φ17.5	95	68	44	10	-
5	φ32	φ20	110	78	49	10	-
6	φ40	φ22.5	120	88	54	13.5	-
7	φ50	φ27.5	148	110	64	16	40.5
8	φ63	φ27.5	162	125	78	13.5	42

Izinto eziphathekayo zeAluminiyam ingxubevange yeProfayili I-Aluminiyam ye-pneumatic cylinder ityhubhu: i-aluminium ingxubevange ye-6063 T5

Ubude bethu obuqhelekileyo bungama-2000mm, ukuba ufuna obunye ubude, nceda ngokukhululekileyo usazise.
Umphezulu we-Anodized: Ityhubhu yangaphakathi-15±5μm Ityhubhu yangaphandle-10±5μm
Izivumelwano zokuyila i-FESTO, i-SMC, i-Airtac, i-Chelic njl.
Izivumelwano kumgangatho we-ISO 6430 ISO6431 VDMA 24562 ISO15552 njl.
Isetyenziselwa i-cylinder eqhelekileyo, i-compact cylinder, i-mini cylinder, i-Dual Rod cylinder, i-Slide cylinder, i-Slide Table cylinder, i-Gripper njl njl. Kwakhona kwiisilinda ezikhethekileyo.

Ukuqulunqwa kwemichiza:

Ukuqulunqwa kwemichiza	Mg	Si	Fe	Cu	Mn	Cr	Zn	Ti
Ukuqulunqwa kwemichiza	0.81	0.41	0.23	<0.08	<0.08	<0.04	<0.02	<0.05

Inkcazo:

Ukuqina koxinzelelo (N/mm2)	Ukomelela kweSivuno (N/mm2)	I-Ductility (%)	Ukuqina komphezulu	Ukuchaneka kweDayimitha yangaphakathi	Uburhabaxa baNgaphakathi	Ukuthe tye	Impazamo yokutyeba
Sb 157	S 0.2 108	S8	HV 300	H9-H11	< 0.6	1/1000	± 1%

Ukunyamezela kweThubhu yeAluminiyam yeAluminiyam:

UKUNYANZELWA KWE-ALUMINIUM ALLOY TUBE
Ubungakanani Bore	UNYAMEZELO
mm	H9(mm)		H10(mm)		H11(mm)
16		0.043		0.07		0.11
20		0.052		0.084		0.13
25		0.052		0.084		0.13
32		0.062		0.1		0.16
40		0.062		0.1		0.16
50		0.062		0.1		0.16
63		0.074		0.12		0.19
70		0.074		0.12		0.19
80		0.074		0.12		0.19
100		0.087		0.14		0.22
125		0.1		0.16		0.25
160		0.1		0.16		0.25
200		0.115		0.185		0.29
250		0.115		0.185		0.29
320		0.14		0.23		0.36

FAQ:

Q1: Yintoni imodeli yeDFM? A: ☆ Ngumgangatho we-FESTO.Ubungakanani bombhobho busuka kwiDia12mm ukuya kwiDia100mm.

Inkcazo:☆Qhuba kwaye ukhokele iyunithi kwindlu enye

☆ Ukuchasa okuphezulu kwiitorque kunye nemikhosi esecaleni

☆Isikhokelo esicacileyo okanye esijikelezayo sebhola

☆Uluhlu olubanzi lokunyuka kunye nokhetho lokuncamathisela

☆ Uluhlu olubanzi lweeyantlukwano ezilungiselelwe usetyenziso

Q2: Ukuba sithenga i-DFM, ngaba kunokwenzeka nge-anodizing ye-Aluminium 6063 T5 Cylinder Tube?

A: Le Cylinder ye-Pneumatic ayikhuthazwa ukuba i-oxidized, kuba umthengi kufuneka ayinqumle ngokwakhe kwaye ayiqhube kwaye enze unyango lwe-oksijini emva kokuyithenga.

I-Q3: Yintoni ubude ukuba siyalelaIAluminiyam Extrusion yePneumatic Cylinders?

A:Ubude ziimitha ezi-2.

I-Q4: Imodeli ye-DFM ebonakalayo

A: ☆ Nge-DFM ekhokelwayo, unokuthembela kwisikhokelo esichanekileyo kunye nokufunxa okukhulu kweetorque kunye nemikhosi esecaleni, idityaniswa noyilo olomeleleyo, olubambeneyo.Ifanelekile ukubethelwa, ukuphakamisa kunye nokumisa izicelo.

Q5: Wumnqwazilixesha lokuhambisamalunga Iprofayile yeAluminiyam yeSilinda yoMoya?

A: ☆ Ukuba iityhubhu ezenziwe ngokwezifiso, ixesha lifuna iintsuku zokusebenza ezingama-50-60, kodwa ukuba kwiityhubhu eziqhelekileyo, ixesha lethu lokuhambisa liyi-15-20 iintsuku zokusebenza.

Ngaphambili: I-SDA COMPACT PNEUMATIC CYLINDER TUBE, ALUMINUM PNEUMATIC CYLINDER BARREL

Okulandelayo: MGP-Z Series Guide Rod China Air Cylinders Tube

Bhala umyalezo wakho apha kwaye uwuthumele kuthi